GN Floater Hub

  • 5 x 5”  Bolt Circle Assembly
  • 5 x 4.75” Bolt Circle Assembly
   
Wheel Studs – 5 Pak

  • Press in;  5/8" coarse XL studs with machined flat on head- so they can be                                                                     easily pressed into hubs

  • Screw in;  5/8" to screw in PEM, ACE or Winters 5 x 4.75" Bolt Circle hubs

Rear Ends, Housings, Axles, and Hubs
Click Tabs below for Detailed Product Information
9” Ford New Stamped Center Housing
  
These now fit 9" Ford 2.89", 3.062" & 3.25" carriers,
weigh 18 lbs and are  .160" wall thickness.
  • Approved by IMCA for use as a OEM replacement

Now Available in Round Smooth Back for Street Rods and Hot Rods
9” Ford Floater Housing
Standard .188" wall DOM tubes

OPTIONS:
  • with New Center 
  • with Reconditioned Center  
  • with .125"  Chrome Moly Tubes
  • with GM Metric Control Arm Mounts
  • Radiused Lower Mounts for Metric 
9” Ford Floater Complete Assembly
Standard .188" wall DOM tubes

Includes GN  floater housing, hub assemblies with
.810 brake rotors, axles, seals & bearing kits.


  • New Center complete Floater Assy 
  • Reconditioned Center  complete Floater Assy
  • Reconditioned Center with GM Metric Control Arm Mounts
  • choose 5 x 5” or  5 x 4.75” Bolt Circle  ....  4.75" additional cost
  • Wide 5 Solid Axle Spline (28 or 31) 
  • option  Wide 5 Gundrilled Axle Spline 31 only
  • option .125" or .180" wall thickness Chrome Moly Tubes

Wide 5 Axles Double Spline  Floater Axles

  • Solid , 8620 Heat Treated Steel

  • Gundrilled,  8620 Heat Treated in the USA
GN Snout with Tube

Lengths,  24" thru 32”, every inch or custom lengths available.
We turn our axle tubes in a lathe after the snouts are welded in.
NOTE:  24" fits both sides of  60" centered Quick Change.

  • GN Snout with Tube
  • GN Snout  for 2.5" GN bearing, 4130 material
  • GN RH Nut
GN Hub Replacement Parts

  • Drive Flange Kit
  • GNHBAK Bearing Kit
  • Dust Cap Kit
  • GN Bearing,  L610549
  • GN Race,   L610510
  • GN RH Nut 
  • GN Lock Washer
  • GN Hub Seal
  • Hub Snap Ring
  • O-Ring  for drive flange
  • Axle Seal (wide 5 or GN)
  • GN Dust Cap
Custom 9" Ford Rear End Housings

  • made to order
  • build to your diagram or prints
  • non refundable


Clink Images for Links to Product Information Pages
Flanged Axles for 9" Ford

33” long with 8 3/4” of inner spline ( 28 or 31).

3 bolt patterns on hub—5 x 4.5”. 5 x 4.75” or 5 x 5”.


pemracing.com is a manufacturer of general product lines in the field of automobiles to the order of and specifications of others
Click here to add text.
Rear Disc Brake KIts

PEM Econo Rear Disc Brake Kits - click picture for view of all kits